 |
|
Noise and Vibration Research Group -
Ongoing projects
- EU
- EU FP7 Marie Curie Intra-European Fellowships (IEF),
PAM: the Physics of Acoustic Materials
(coordinator)
- COST Action TUD, TU1105:NVH
analysis techniques for design and optimization of hybrid and
electric vehicles
- EU FP7 Marie Curie Initial Training Network (ITN), FLOWAIRS: Silent Air Flows in
transport, buildings and power generation
- EU FP7 Marie Curie Initial Training Network (ITN), ANADE: Advances in numerical
and analytical tools for detached flow prediction
- EU FP7 Marie Curie Industry-Academia Partnerships and Pathways
(IAPP), INTERACTIVE:
Innovative Concept Modelling Techniques for Multi-Attribute
Optimization of Active Vehicles
- EU FP7 Marie Curie Initial Training Network (ITN), GRESIMO: Best Training for Green
and Silent Mobility
- EU FP7 Marie Curie Initial Training Network (ITN), IMESCON: Innovative Methods of
Separated Flow Control in Aeronautics
- EU FP7 Marie Curie Industry-Academia Partnerships and Pathways
(IAPP), Tire-Dyn:
Experimental and Numerical Analyses of the Dynamic Behavior of
Rolling Tires in order to Improve the Tire Modeling
Accuracy (coordinator)
- EU FP7 Marie Curie International Research Staff Exchange Scheme
(IRSES), SUPERPANELS:
Strengthening and Upholding the Performances of the new
Engineered Research PANELS
- EU FP7 Collaborative Research Project, ESTOMAD: Energy Software Tools
for Sustainable Machine Design
- EU FP7 Collaborative Research Project, EMBOCON:
Embedded Optimization for Resource Constrained
Platforms
- EU FP7 Marie Curie Initial Training Network (ITN), MID-FREQUENCY:
CAE Methodologies for Mid-Frequency Analysis in Vibration and
Acoustics (coordinator)
- EU FP7 Marie Curie Initial Training Network (ITN), VECOM: Vehicle
Concept Modelling
- IWT
- IWT O&O project no. 110646, DiLaCut: Direct diode
laser cutting
- IWT O&O project no. 110268, ASTRA: Advanced
STRuctural Acoustics for lightweight structures and advanced
materials
- IWT O&O project no. 110360, HEV-NVH: A new
generation of NVH methods for hybrid and electric vehicles
- IWT TETRA project no. 100141, DfX-Bridge:
Multidisciplinary design of electronic PBA modules, bridging
theory and practice
- IWT SBO project no. 100031, POM2: Prognostics for
Optimal Maintenance
- IWT Baekeland project no. 090730, DECRESCENDO:
Virtual prototyping for NVH evaluation of wind turbine drive
trains
- IWT Baekeland project no. 090290, Integration of model
predictive control in vehicle development
- IWT SBO project no. 060043, Fuzzy FE: Fuzzy Finite
Elements
- FWO
- FWO project no. G.0371.12 : Experimental analysis and
numerical simulation of uncertainty and variability in the
mid-frequency dynamic behaviour of vibro-acoustic systems
- FWO project no. G.0316.09 : Numerical methods for accurate
auralisation and evaluation of the binaural human perception of
broadband acoustic and vibro-acoustic phenomena
- K.U.Leuven
- K.U.Leuven-BOF OT/11/066, Efficient simulation methodologies
to cope with variability and uncertainty in mid-frequency dynamic
analysis
- K.U.Leuven-BOF EF/05/006, Center-of-Excellence: Optimization
in Engineering
Past projects
- EU
- EU FP7 Collaborative Research Project, MID-MOD:
Mid-frequency vibro-acoustic modelling tools - Innovative CAE
methodologies to strengthen European competitiveness
- EU FP7 Marie Curie Intra-European Fellowships (IEF),
EXPLICA: Exhaust Pipe noise radiation Modelling by
Innovative Computational Aeroacoustics (coordinator)
- EU FP6 Marie Curie Research and Training Network (RTN),
Smart
Structures CAE: A Computer Aided Engineering Approach to
Smart Structures Design (coordinator)
- EU FP6 Marie Curie Research and Training Network (RTN),
AETHER: Aero-acoustical and thermo-acoustical
coupling in energy processes
- EU FP6 Marie Curie Host Fellowships for Early Stage Research
Training (EST), MEST-CT-2005-020263,SIMVIA 2: Advanced and New simulation
methods in vehicle vibro-acoustics ? Scientific analysis,
experimental verification and development of methodologies fo the
industrial application
- EU FP6 Co-ordination Action CANTOR:
Coordinating Noise Transportation Research And Engineering
Solutions
- EU FP6 Marie Curie Host Fellowships for Early Stage Research
Training (EST), MEST-CT-2004-503675,EDSVS II: European
Doctorate in Noise and Vibration Studies
- EU FP6 NMP project no. NMP2-CT-2003-501084, INMAR:
Intelligent materials fro Active Noise Reduction
- EU FP6 Marie Curie Research and Training Network (RTN),
MRTN-CT-2003-505164, MADUSE: Modelling Product
Variability and Data Uncertainty in Structural Dynamics
Engineering (coordinator)
- EU FP5 GROWTH project no. GRD1-CT-2002-0078, NOISELESS:
Reduction of Noise Emission on Machine Tools
- EC-Growth Project GRD1-2000-25828, ECOSYSTEMS:
Advanced Machining Systems for Environmentally Friendly
Manufacturin
- EC-Growth Project G3RD-2000-00102, TECABS:
Technologies for carbon fibre reinforced modular automotive
structures
- BRITE-EURAM Project no. 3443, SALOME: Structural
acoustics of light-weight components in the medium frequency
range
- BRITE-EURAM Thematic network SEANET: Statistical
Energy Analysis NETwork
- BRITE-EURAM Project, SMARTACUS: Smart acoustic
house
- BRITE-EURAM Project, DAFNOR: Distributed active foils
for noise reduction (coordinator)
- BRITE-EURAM Project, FATYNAMICS: Concurrent
engineering approach for durability optimisation of trucks
- BRITE-EURAM Thematic network ENOVNET: European noise
and vibration network
- BRITE-EURAM Project no. 7796, SOQCRATES: Sound
Quality in Cars: Assessment and Engineering of Solutions
- BRITE-EURAM Project no. 7797, VAMP: Vibro-Acoustic
Modelling and Prediction of transportation vehicles? dynamic
behaviour in the medium frequency range
- BRITE-EURAM Project, PIANO: New pass-by noise
optimisation methods for quiet and economic heavy road
vehicles
- BRITE-EURAM Project, BRAIN: Basic research on
aircraft interior noise (coordinator)
- BRITE-EURAM Project, ANRAVA: Advanced noise reduction
using active vibration actuators
- EU Aero-1C Project, ASANCA II: Advanced study for
active noise control in aircraft
- EU FP2 Project, ASANCA: Advanced study for active
noise control in aircraft
- IWT
- IWT O&O project no. 080067, MODELISAR: From
system modelling to S/W running on the vehicle
- IWT O&O project no. 100002, Understanding the influence
of the contact conditions between vehicle body and acoustic trim on
the vibro-acoustic behavior
- IWT SBO project no. 090045, POM: Prognostics for
Optimal Maintenance
- IWT O&O project no. 070337, MIDAS: Next
generation numerical tools for mid-frequency acoustics
- IWT O&O project no. 060323, Automatic control of
harvesting and separation system on agricultural
harvesters
- IWT O&O project no. 060381, KRATOS: Test bench
for dynamic testing of large gear units
- IWT SBO project no. 050163, CAPRICORN: Simulation and
design tools towards the reduction of aerodynamic noise in confined
flows
- IWT O&O project no. 060532, HOTFAT: Development
of reliable fatigue life prediction processes for light-weight
exhaust systems
- IWT O&O project no. 060421, SOUND BRUSH:
Industrial Compressor Noise: Innovative measurement and
engineering technologies
- IWT joined research project: Accelerated fatigue testing for
vehicle components and systems
- IWT O&O project no. 050590, DISCO: Distributed
Suspension Control
- IWT cluster project, Light-RV: Design of a
light-weight foldable camper
- IWT O&O project no. 040444: Dynamic balancing of weaving
machines
- IWT O&O project no. 040433: ALD Analysis leads
design ? Frontloading digital functional performance
engineering
- IWT O&O project TRICARMO: Trimmed Car Acoustic
Response Modelling
- IWT O&O project WINDY: Flow-induced noise and
vibration modelling in the transportation industry
- IWT project no. ADV/000163, GRAMATIC: Mixed
numerical-experimental vibration analysis for the identification of
stiffness and damping properties of layered and graded
materials
- IWT O&O project no. 030391, ACSAS: Advanced
Controllers for Semi-Active Suspensions
- IWT O&O project no. 010463, ARCOMET: Mobile
self-erecting tower crane with maximal com-fort for the operator:
design and construction of a prototype
- IWT project no. VLIM/0/9328: Development of an active sound
attenuator for diesel engines
- IWT project no. AUT/000252, ACOCAR (Actively COntrolled
CAR): High Bandwidth Computer Controlled Suspensions
- FWO
- FWO project no. G.0429.07: Investigation of the
vibro-acoustic behaviour of honeycomb core sandwich structures:
experiments and simulation
- FWO project no. G.0446.06: Measurement, modelling, and
control of weakly nonlinear, slowly time varying dynamical
systems
- FWO project no. G.0563.06: Experimental and numerical
evaluation of the elastic moduli of poro-elastic materials for
predicting and optimising sound absorption and sound insulation
properties
- FWO project no. G.0350.05: Development and validation of
hybrid substructuring techniques for acoustic simulations
- FWO project no. G.0467.05: Advanced numerical and
experimental techniques for the identification and sound
propagation in confined flows
- FWO project no. G.0343.04: Design and validation of advanced
system identification techniques for Operational Modal Analysis in
presence of eXogeneous input signals (OMAX)
- FWO project no. G.0528.04: Accurate tracking control of
non-linear multi-variable systems based on experimentally
identified generalized block-oriented model structures
- FWO project no. G.0476.04: Fuzzy finite element method based
on optimisation techniques
- FWO project no. G.0161.02: Coupled
electromagnetic-vibroacoustic modelling of electromagnetic
systems
- FWO project no. G.0123.01: Design and development of a
prediction technique for the analysis and optimisation of the low
and mid-frequency dynamic behaviour of complex vibro-acoustic
systems
- FWO Scientific Research Network: ICCoS, Identification and
Control of Complex Systems
- KULeuven
- K.U.Leuven-BOF CREA/07/015 Vibro-acoustic mid-frequency
modelling: a fuzzy numerical approach
- Other
- Bilateral Project: Refining and applying the pro-active
ecodesign method 'Eco-Pas'
- ESA Project PRODEX: Spacecraft Dynamic Behaviour
Experiment
- IUAP P5/06: Advanced Mechatronic Systems
- TAP project no. PA-01-314: Static and dynamic design
analysis procedures for structures with uncertain
parameters
- CHASM: Coping with health, environmental and safety aspects
in standards for machinery
- Bilateral Project: Research on the dynamics of the
drivetrain of a wind turbine
- HUMAN CAPITAL AND MOBILITY Scientific and Technical
Co-operation Network Project no. 30092, MONICA: Methods on noise
identification control activities
|
|
Print